Quickie LX Custom

Quickie LX Custom
by Sunrise / Quickie

Model No. EILX
Fully customizable with seat widths ranging from 12″-20″ and a variety of seat depths, caster and wheel options.
  • Complete range of footplate, armrest and caster options
  • 60, 70, 70 “V”, or 90 degree hangers
  • Full selection of rear wheel options

Product Brochure    Owner’s Manual



  • Complete range of footplate, armrest and caster options
  • 60, 70, 70 “V”, or 90 degree hangers
  • Full selection of rear wheel options
  • Black anodized chair parts
  • Adjustable-height backrest
  • Multiple color options

Key Specs


  • Overall Width – Folded: 12.50″
  • Quick-Release Axles: Yes
  • Weight capacity: 250 lbs.
  • Weight: 28 lbs.

Overview of the Quickie LX Custom

The Quickie LX weighs just 28 pounds which is the same as many ultra lightweight wheelchairs, but costs several hundred dollars less than those same chairs.  The adjustability of the backrest and seat heights as well as an incredible number of options to meet your various personal needs, makes the LX an ultra lightweight chair at a lightweight friendly cost.

The Quickie LX comes with a non-adjustable axle plate. If you are looking for an adjustable axle plate that will provide adjustments, center of gravity options, and allow you the user to change camber degree on the rear wheels please check out the Quickie LXI.

Measuring Guide

Seat Depth1
Measure from the most posterior point of the body to the inside of the knee, minus at least two inches. Some prefer more leg overhang to make room for their hand when lifting their leg.
Back Height2
Measured from the seat base to the top of the wheelchair back. Depends on how much upper back support is needed, and also affects freedom for the upper body to rotate.
Rear Seat to Floor3
Measurement from the ground to the rear seat edge. Relative to the front seat-to-floor dimension, this determines the rearward slope (“dump” or “squeeze”) of the wheelchair seat.
Hanger Angle4
Determines how far the toes extend away from the body, measured from the horizontal. A tighter angle allows the wheelchair to turn around in less space. Depends in part on ability of the knee to bend towards the perpendicular.
Seat Width5
Determined by the widest point of the body from knee to hip, plus an inch to ensure room to move. Consider bulk of clothing, particularly a heavy winter coat, if relevant.
Wheel Camber6
Angle of the wheel relative to the vertical. More camber improves stability and agility, but also limits ability to pass through narrow spaces. A typical daily wheelchair uses three degrees of camber.
Front Seat to Floor7
Measure the leg from the back of the knee to the sole of the foot. Then subtract the thickness of the cushion when it is compressed. Next, add a minimum of two inches for footrest clearance. Do not add the footrest clearance if the wheelchair will be foot-propelled.
Footrest Width8
Measure from the inside of each legrest tubing the distance or desired distance between legrests.
Center of Gravity9
Measure from the front of the seat back post to the center of the rear axel.
Seat to Footrest Length10
Measure from the edge of the seat upholstery to the top rear of the footrest.
Backrest Angle11
Measure the the angle of the back post to the floor. Ninety degrees will be perpendicular to the floor, to approximate the angle from the back post to the seat, subtract two degrees from measurment for every .5″ of dump.


Additional information


Overall Width: 20" to 28"
Overall Width – Folded: 12.50"
Legrest Options: Swing Away
Seat to Floor Heights: 15" to 19.5"
Frame Type: Folding


There are no reviews yet.

Be the first to review “Quickie LX Custom”

Your email address will not be published. Required fields are marked *